
MULTI-CHANNEL ANALOG MIXERS WITH ENHANCED FX, USB RECORDING MODES, AND BLUETOOTH®
52
Microphone Stand
The bottom panel of the P has three non-threaded holes that allow it to be fitted with an optional microphone
stand adapter. This lets you support the mixer on a standard mic stand, and adjust its height and level to whatever suits
your strangely-complex set of preferences.
1. Order the Atlas AD-11B mic stand adapter available from many a fine music store. (It is made and distributed by Atlas Sound.)
2. Use three Trilobular thread rolling screws 6-32 x 1/4" long to secure the adapter to the bottom of the mixer [see below].
Do not use screws longer than 1/4" as these could damage the circuit boards.
Do not use screws shorter than 1/4" or the adapter will not be securely fixed to the mixer.
Repair
For warranty service, refer to the warranty information on page 62.
Non-warranty service for Mackie products is available at a factory-authorized service center. To locate the nearest service
center, visit www.mackie.com, click “Support” and select “Service Center Locater”. Service for Mackie products living outside
the United States can be obtained through local dealers or distributors.
If you do not have access to our website, you can call our Tech Support department at 1-800-898-3211, Monday-Friday during
normal business hours, Pacific Time, to explain the problem. Tech Support will tell you where the nearest factory-authorized
service center is located in your area.