MULTI-CHANNEL ANALOG MIXERS WITH ENHANCED FX, USB RECORDING MODES, AND BLUETOOTH®
44
Flanger Parameters and Values
The rate (Hz) and depth (ms) determine how many cycles per second the chosen effect oscillates.
However, the rate and depth of Chorus 1, Chorus 2 and Flanger is expressed as 0.1x Hz / ms which
translates the value that the processor utilizes. An easy way to understand the value is to take
the number below the virtual knob and “move” the decimal one point to the left (or multiply by 0.1).
For example, if rate is displayed as 37, then it’s really 3.7 Hz.
Lastly, onto the final three multi-purpose effects (Delay + Reverb, Delay + Chorus, and Chorus).
Time
– This knob sets the current delay time in milliseconds, from 20 ms to 1000 ms.
Rate
– This knob sets the speed of the modulation. The range will vary depending on the effect chosen.
Depth
– This knob sets the depth of the delay modulation. The range will vary depending on the effect chosen.
Decay
– This knob represents the decay time of the reverb, ranging from 0 to 60.
Size
– This knob represents the amount of desired reverb (or “the size of the room”), ranging from 0 (no reverb)
to 15 (max reverb).
Parameter
Low Value
High Value
Default
Increments
Rate
0
100
10
±1
Depth
10
150
62
±1
Blend
0
100
100
±1
EQ
–
–
–
–
Frequency
400 Hz
16.0 kHz
7.6 kHz
Variable
Width (Q)
0.5
3.0
2.0
±0.1
Gain
–8 dB
+8 dB
-1 dB
±1 dB
LPF
6.0 kHz
18.0 kHz
18.0 kHz
±0.1-0.2 kHz
HPF
80 Hz
600 Hz
90 Hz
±1-10 Hz
EQ
PRESETS
RATE DEPTH
TIME
DELAY + CHORUS
FX
500
50
39