manualshive.com logo in svg

Mackie ProFXv3+ Series, Руководство пользователя, Страница: 22 / 63

Поделиться
Скачать
Mackie ProFXv3+ Series Скачать руководство пользователя страница 22

MULTI-CHANNEL ANALOG MIXERS WITH ENHANCED FX, USB RECORDING MODES, AND BLUETOOTH®

22

Pan Knobs [Pr and Pr]: 

This control allows you to adjust how much of the channel signal is sent to the left 

versus the right outputs.

The pan control employs a design called “Constant Loudness.” If you have a channel panned hard left (or right) and then pan 

to the center, the signal is attenuated about 3 dB to maintain the same apparent loudness. Otherwise, it would make the sound 

appear much louder when panned center.

Mute Switches [Pr and Pr]

Mute switches do just what they sound like they do. They turn off the signal by “routing” it into oblivion. Engaging a channel’s 

mute switch (almost) provides the same results as turning the fader all the way down (a pre-aux send is not affected by the 

channel fader, but it is by the mute switch).

The channel insert will continue to provide a signal when a channel is muted. Mute switches illuminate red when engaged.

The Pr has seven mute switchs, while the Pr has eight. There are no mute switches  

on the P.

Channel Level Knobs and Faders

Pr

P

Pr

Содержание ProFXv3+ Series
































































Отзывы:

Нет отзывов