Mackie DL806, Справочное руководство

Страница: 42 / 160

Mackie DL806 and DL1608 Reference Guide
42
iPad / Playback
Now let’s take a look at the iPad channel strip since it operates slightly different than the input channel
strips. To get here, flick or drag left anywhere in the mixer view swipe zone until the iPad channel appears.
The differences between the input channel strips and iPad channel strip are noted below. Channel 16
was left in the image on purpose to easily see the side-by-side difference between an input channel
strip and the iPad channel strip. The only difference between the iPad channel and the FX channels is
that the iPad channel has a gain reduction meter. Otherwise, they are totally the same. Take a look below:
Balance Slider — The pan slider becomes a balance slider on the iPad channel, now acting as a stereo
balance. It allows you to adjust how much of the left or right output signals are heard. Touch and drag
the sliders left or right to make adjustments. Center it to hear the output equally from the left and right
sides. The balance may be centered by double-tapping the balance ball.
No High-Pass Filter — There is no high-pass filter on the iPad channel, so it will be absent in the EQ view
for this channel.
Stereo Meters
— Since the iPad channel is a stereo channel, the meters are shown in stereo, not mono.
The iPad channel controls the level and EQ from the iPad music library (or any other audio app
on the iPad that supports background audio playback). It’s easy, just follow these instructions:
(1)
— Make sure that the iPad is attached to the mixer for playback, as it will not work in Wi-Fi mode.
(2) — Open the audio app of your choice on the iPad by tapping its icon; this could be the music app,
your favorite multitrack DAW, Spotify and more.
(3) — Continue on to the next page for further instructions.