Mackie DL806 Скачать руководство пользователя

Страница: 103 / 160

Mackie DL806 and DL1608 Reference Guide

103

Random Notes and Other Musings

To Push or to Pull, That is the Question

—

The CURRENT show on the iPad must match the CURRENT

show on the mixer. If they do not, you will be asked to select between the two so they are synced.

Why would shows not be synced? Well, one example could be that current show (X) was used at a gig.

The band and crew then pack up for the next show, but the engineer wants to make some tweaks for

the next night’s performance. The engineer makes a few changes and stores a new snapshot offline;

this show now differs from the CURRENT show that is still on the mixer. What will happen when the

iPad is reunited with the mixer once again? The engineer will be asked which one to use: the current

show on the mixer [X, tap the DL806/1608 button] or the current show on the iPad [Y, tap the iPad

button]. In this case, the engineer would choose the iPad since it contains the latest changes

DL806/DL1608

– tapping the DL806/DL1608 button here is considered PULLING the current

show from the mixer and copying it to the iPad. Note that the previous current show on the

iPad is replaced, but an offline copy of the previous show will remain. It will take about two

seconds per snapshot to synchronize the shows. All connected iOS devices will automatically

sync with the current show.

iPad

– tapping the iPad button here is considered PUSHING the current show from the iPad

and copying it to the mixer. It will take about two seconds per snapshot to synchronize

the shows. All connected iOS devices will automatically sync with the current show.

Go Offline

– tapping the Go Offline button here allows you time to figure things out before

deciding which show to use.

You will also receive the Show Synchronization notification the first time you power on the DL Series

mixer if you tried out the Master Fader app prior to purchasing the mixer.

Each iPad that is offline is unique. In other words, multiple varying snapshots and shows

may be created on each iPad. This is something to be aware of when reconnecting.

64: it’s not just a number, kids

—

A maximum of 64 images may be used per show. However, If the

same image is used on multiple IDs/snapshots, it only counts as one image (if the image has been

selected from show images and not the photo library). Show images do not count toward the 64,

nor do icons.

Содержание DL806

































































































































































Результаты поиска

Содержание DL806

Отзывы:

Похожие инструкции для DL806

Бренды по названию

Популярные бренды

Mackie DL806, Справочное руководство

Результаты поиска

Содержание DL806

Отзывы:

Похожие инструкции для DL806

Бренды по названию

Популярные бренды