8
This is the one configuration which can be changed without having to reset the
system for the function to take effect.
2.2.3
Connector 1
12 position pluggable terminal strip. Use for remote control start of message
playback, stopping messages, and playing relay output.
1
Common ground for all inputs
2
Start 1 Input, connect to common for message 1 playback
3
Start 2 Input, connect to common for message 2 playback
4
Start 3 Input, connect to common for message 3 playback
5
Start 4 Input, connect to common for message 4 playback
6
Start 5 Input, connect to common for message 5 playback
7
Start 6 Input, connect to common for message 6 playback
8
Start 7 Input, connect to common for message 7 playback
9
Start 8 Input, connect to common for message 8 playback
10
Stop Input, connect to common to stop message playback or recording
11
Play Relay Output, Common
12
Play Relay Output, Form A, connect to position 11 for normally open
contacts, closed when playing.
2.2.4
Connector 2
3 position terminal connection. Used for remote control of recording.
1
6
12
Play Next
Enabling Next Message allows
Start 8 input(Connector 1, Pos.
9) to initiate playback of next
valid message sequence. First
input after power on will play
message 1. All operation modes
are supporated and other start
inputs (1 - 7) are disabled.
Disable
Enable
7
Memory Protect
Allows the user to lock message
memory so that messages may
not be accidentally overwritten.
Enables record ability
Disables record ability
8
