Machine Mart KING 125, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 24

9
WATER SUPPLY CONNECTION
1. Connect the water supply hose
(1) to the inlet connection (2). See
Fig. 3.
NOTE: A reinforced hose with
inside diameter of at least
10 mm should always be
used.
NOTE: The water supply flow rate
must be at least 6.1 l/min.
and the inlet temperature must not exceed 40 °C.
THE HIGH PRESSURE HOSE
1.
Fig. 4
Connect one end of the high
pressure hose (3) to the gun (4).
See Fig. 4.
2. Connect the other end of the
high pressure hose to the outlet
(5), tightening firmly.
FITTING THE LANCE
1.
Fig. 5
Take hold of the gun (1) in one
hand and fit the lance (2) on to
the gun as shown in Fig. 5.
2. Tighten the collar (3) to secure.
See Fig. 5.
Fig. 3