background image

4

GENERAL SAFETY RULES 

1. It is important to read all parts of this operator's manual carefully before 

using the power washer.

2.

NEVER 

direct the spray towards any person or animal.

3.

NEVER 

direct the spray towards electrical wiring or equipment.

4.

NEVER 

hold your finger over the high pressure nozzle.

5.

ALWAYS

 remember that the exhaust, exhaust gases and the metal lance 

can get very hot during use.

6.

NEVER 

allow children to use this machine.

7.

NEVER 

operate the machine with any of the covers removed.

8.

NEVER 

attempt any repairs to this machine. Always refer to a qualified 

service agent.

9.

NEVER 

supply any liquid other than water to the water inlet.

10.

NEVER 

use the detergent bottle to spray solvents, e.g. paint thinners, petrol, 

oil etc. 

11.

ALWAYS

 release any residual pressure in the system by turning off the water 

supply and operating the trigger before disconnecting any hose or 
accessory. 

12.

NEVER

 disconnect the plug by pulling on the power supply cable, and 

never move the power washer by pulling on the high pressure hose.

13.

ALWAYS 

keep the machine itself dry and well clear of water spray.

14.

ALWAYS

 wear protective clothing and safety glasses. Loose particles and 

other debris may be propelled at high speed by the water jet.

15.

ALWAYS

 grip the gun firmly before pressing the trigger, expect the gun to 

‘kick’ when starting.

16.

ALWAYS

 respect the requirements of the local water company. Power 

washers may only be connected to the mains drinking water supply, if a 
backflow preventer valve is installed in the supply hose.

17. When not in use, 

ALWAYS 

disconnect from the water supply, and ensure the 

system is completely drained. Store in a cool dry location.

WARNING: Water at high pressure can be dangerous and can cause 
damage to persons or property if the operator is careless. Never allow 
anyone to operate this equipment unless they are thoroughly reliable, 
and familiar with the safety precautions.

Содержание KING 125

























Отзывы: