MacDon Swath Compressor, Руководство по эксплуатации и запасным частям

Страница: 38 / 90

215953
30
Revision A
1022823
A
B
C
Figure 2.35: Side Deflector Shipping Position
12. Loosen handle (A) and remove three bolts and nuts (B)
from side deflector (C). Retain the bolts and nuts.
ϭϬϯϵϰϳϯ
A
C
B
Figure 2.36: Side Deflector Working Position
13. Rotate side deflector (A) to working position, and secure it
to the compressor shield with three bolts and nuts (B) from
the previous step. Install the bolts with their heads facing
the crop.
IMPORTANT:
When an M1170 NT or M1170 NT5 is in narrow transport
mode, there is risk of the side deflectors contacting the
stairs if the deflectors are positioned fully outboard.
14. Torque nuts to 22 Nm (15 lbf·ft).
15. Position the side deflector and tighten adjustment
handle (C). Repeat on the opposite deflector.
1023465
A
B
C
D
Figure 2.37: Front Pivot Pins
16. Push down on rear (A) of the shield while another installer
lifts the front (D).
17. Align ball joints (C) with pins (B) at the front of the shield,
and insert pins (B). Use a rubber mallet if the pins are
difficult to install.
INSTALLATION INSTRUCTIONS