MacDon Swath Compressor, Руководство по эксплуатации и запасным частям

Страница: 52 / 90

215953
44
Revision A
3.3.5 Adjusting Side Deflectors
To reduce wind damage to the windrow, adjust the side deflectors to ensure the edges of the windrows are tucked in and
anchored to the stubble.
ϭϬϯϵϰϳϲ
A
B
Figure 3.25: Swath Compressor Side Deflectors
1. To adjust swath compressor side deflectors (A), loosen
handles (B) and move deflectors to the desired position. To
ensure windrow placement is centered, set both side
deflectors to the same position.
IMPORTANT:
When an M1170 NT or M1170 NT5 is in narrow transport
mode, there is risk of the side deflectors contacting the
stairs if the deflectors are positioned fully outboard.
2. Tighten handles (B) when adjustment is complete.
3.3.6 Locking and Unlocking Swath Compressor
The swath compressor lock is located on the left cab-forward side of the swath compressor frame. When engaged, the lock
prevents the compressor shield from lowering.
1021929
A
Figure 3.26: Swath Compressor Lock
1. Turn lock handle (A) clockwise to engage the swath
compressor lock under the following conditions:
•
Swath compressor is not in use
•
Windrower is being serviced
•
Windrower is in engine-forward mode
2. Turn handle (A) counterclockwise to disengage the lock
before operating the swath compressor.
OPERATION