MacDon R2 Series, Руководство пользователя

Страница: 16 / 20

16 R2 Series Clinic Handout
First 10 Hours, Then Daily
Inspect cutterbar discs. Refer to Inspecting
Cutterbar Discs, page 76
Inspect discblades. Refer to Inspecting Discblades,
page 87
Inspect accelerators. Refer to Inspecting
Accelerators, page 93
Inspect rock guards. Refer to Inspecting
Rock Guards, page 97
Inspect drums. Refer to Inspecting
Drums, page 100
Check hydraulic hoses and lines. Refer to 4.12.1
Checking Hydraulic Hoses and Lines, page 151
Every 25 Hours
Check conditioner drive belt tension. Refer to
Inspection Conditioner Drive Belt, page 134
Lubricate idler pivot. Refer to 4.4 Lubrication,
page 68
Lubricate upper and lower driveline universal joints.
Refer to 4.4 Lubrication, page 68
Lubricate roller conditioner and feed roller bearings.
Refer to 4.4 Lubrication, page 68
Lubricate conditioner driveline. Refer to 4.4
Lubrication, page 68
Every 100 Hours or Annually
Check conditioner drive belt tension. Refer to
Inspection Conditioner Drive Belt, page 134
Check roll timing gearbox lubricant. Refer to 4.6.1
Checking and Changing Conditioner Roll Timing
Gearbox Oil, page 124
Check header drive gearbox lubricant. Refer to 4.7.1
Checking Header Drive Gearbox Oil, page 127
Every 250 Hours
Change roll timing gearbox lubricant. Refer to
4.6.1 Checking and Changing Conditioner Roll Timing
Gearbox Oil, page 124
Change header drive gearbox lubricant. Refer to
4.7.2
Changing Header Drive Gearbox Oil, page 129
Change cutterbar lubricant. Refer to 4.5.1
Lubricating cutterbar, page 71
Lubricate left and right driven drums. Refer to
Removing Left Driven Drum and Driveline, page 105 &
Removing Right Driven Drum and Driveline, page 110
R2 Maintenance Schedule
The pages referenced below can be found in the Operator’s Manual
Action Check Lubricate Change