MacDon R113 Скачать руководство пользователя страница 70

Страница: 70 / 276

3.14

Maneuvering/Steering the Mower Conditioner

IMPORTANT:

The valve on the steering line must be in the working, or
open position (handle in line with hose), for the steering
system to operate.

Steering is controlled by the tractor’s remote hydraulic
system. The hitch provides the ability to do the following:

• Move the mower conditioner into

eld position.

• Make right angle turns in either direction.

• Steer around objects on both sides.

• Perform straight-line

eld cutting on either side of

the tractor.

Figure 3.49: Steering Line Valve in Working
(Open) Position

1. Activate steering control lever (A) to maneuver mower

conditioner into the desired path of travel.

a. Move lever

forward

to position (B) to steer the

mower conditioner to the right.

b. Move lever

backward

to position (C) to steer the

mower conditioner to the left.

IMPORTANT:

Operate the steering control lever (A) only brie

and return it to the NEUTRAL or OFF position
as soon as the mower conditioner reaches the
desired path of travel.

IMPORTANT:

Connect hydraulic hoses so that moving the
steering control lever (A) backward steers the
mower conditioner to the left and moving lever
forward steers the mower conditioner to the right.
Refer to

3.8.3 Connecting Hydraulics, page 49

for more information.

Figure 3.50: Tractor Steering Control
Lever Positions

169820

Revision A

Содержание R113





















































































































































































































































































Результаты поиска

Содержание R113

Отзывы:

Похожие инструкции для R113

Бренды по названию

Популярные бренды

MacDon R113, Руководство оператора

Результаты поиска

Содержание R113

Отзывы:

Похожие инструкции для R113

Бренды по названию

Популярные бренды