262175
60
Revision A
ϭϬϰϭϵϬϭ
B
A
C
D
E
F
Figure 4.22: Console and HarvestTouch
™
Display
7.
Press HORN button (A) three times.
8.
Turn IGNITION switch (B) to the ON position.
HarvestTouch
™
Display (C) will light up. Wait for WAIT TO
START (WTS) symbol (D) to disappear.
IMPORTANT:
Over-crank protection symbol (E) will appear if the starter
has been disabled due to overheating.
9.
Ensure that red PARK symbol light (F) is ON and that there
are no error messages on the screen.
A
B
C
ϭϬϰϭϴϳϱ
Figure 4.23: HarvestTouch
™
Display
10. Turn the IGNITION switch to crank position (A).
IMPORTANT:
Do
NOT
move the GSL out of PARK until the hydraulic oil
temperature is at least 32°C (90°F). To check the hydraulic
oil temperature, swipe right on home page area (B) until
the page displays hydraulic oil temperature (C).
IMPORTANT:
•
Do
NOT
operate the starter for longer than 15 seconds
at a time.
•
If the engine does not start, wait at least 2 minutes
before you attempt to start the engine again.
•
If the engine is cranked for longer than 30 seconds in a
2-minute period, the windrower
’
s computer will lock
the starter circuit, and the over-crank protection symbol
will appear on the display. Wait for the over-crank
protection symbol to disappear before attempting to
crank the engine again.
•
If the engine still does not start, refer to
Troubleshooting Engine Starting Problems, page 62
.
NOTE:
When the engine is running and the header is not engaged,
the HarvestTouch
™
Display will show header disengaged
page (B).
Содержание M2170
