MacDon M105, Руководство оператора

Страница: 41 / 384

2 Description
2.1 Definitions
The following terms and acronyms may be used in this manual.
Term Definition
A-Series header MacDon auger header.
API American Petroleum Institute.
ASTM American Society of Testing and Materials.
Bolt A headed and externally threaded fastener that is designed to be paired with a nut.
CDM Cab display module on a self-propelled windrower.
Center-link
A hydraulic cylinder or manually adjustable turnbuckle type link between the header
and the machine to which it is attached. It is used to change header angle.
CGVW Combined vehicle gross weight.
D-Series header MacDon rigid draper header.
ECM Engine control module.
Finger tight
Finger tight is a reference position where sealing surfaces or components are
making contact with each other and the
fi tting has been tightened to a point where
the fi tting is no longer loose.
FFFT Flats from fi nger tight.
GSL Ground speed lever.
GVW Gross vehicle weight.
Hard joint
A joint made with the use of a fastener where the joining materials are
highly incompressible.
Header
A machine that cuts and lays crop into a windrow and is attached to a
self-propelled windrower.
Hex key
A hex key or Allen key (also known by various other synonyms) is a tool of
hexagonal cross-section used to drive bolts and screws that have a hexagonal
socket in the head (internal-wrenching hexagon drive).
hp Horsepower.
ISC Intermediate Speed Control.
JIC
Joint Industrial Council: a standards body that developed the standard sizing and
shape for original 37°
fl ared fi tting.
Knife A cutting device which uses a reciprocating cutter. Also called a sickle.
n/a Not applicable.
Nut An internally threaded fastener that is designed to be paired with a bolt.
N-DETENT The slot opposite the NEUTRAL position on operator’s console.
NPT
National Pipe Thread: a style of fi tting used for low pressure port openings. Threads
on NPT fi ttings are uniquely tapered for an interference fi t.
169890
27
Revision A