MacDon FM100, Руководство по установке

Страница: 3 / 32

Introduction
The Dual Sensor Auto Header Height Control (AHHC) kit (MD #B6211) for the FM100 Float Module is designed for use with
combines that have lateral tilt capability. This kit allows lateral tilt to work with auto header height control.
IMPORTANT:
The Dual Sensor AHHC kit is NOT compatible with New Holland combines with a 10 volt system.
A list of parts included in the kit is provided in Chapter 2 Parts List, page 5 .
Installation time
The approximate installation time for this kit is 1.5 hours.
Conventions
The following conventions are used in this document:
•
Right and left are determined from the operator
’
s position. The front of the float module is the side that faces the crop;
the back of the float module is the side that connects to the combine.
•
Unless otherwise noted, use the standard torque values provided in the header operator
’
s manual and technical
manual.
NOTE:
Keep your MacDon publications up-to-date. The most current version of this instruction can be downloaded from our
Dealer-only site (
https://portal.macdon.com ) (login required).
NOTE:
This document is currently available in English only.
214143
i
Revision F