MacDon A30-D, Руководство по сборке

Страница: 54 / 56

Form 169078 Revision C
Self-Propelled Auger Header Model A30-S, A30-D, and A40-D
Pre-Delivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. Refer to Set-Up Instructions for
adjustment details. The completed checklist should be retained either by the Customer or the Dealer.
CAUTION: Carefully follow the instructions given. Be alert for safety related messages which
bring your attention to hazards and unsafe practices.
Header Serial Number: _______________________

ITEM PAGE
Check for shipping damage or missing parts. Be sure all shipping dunnage is removed. ---
Check for loose hardware. Tighten to required torque if applicable. 6
Check sickle drive belt tension. 44
Check reel drive belt and chain tension. (Not applicable to A40-D). 44
Check auger drive belt and chain tension. (Not applicable to A40-D). 44
Check reel tine to header pan and knife clearance. 46
Check auger stripper bar clearance. 46
Check header angle to middle of adjustment range. 19
Check that header is level. 48
Check header flotation. (75 - 85 lbf (335 - 380 N∙m)). 47
Check lean bar is adjusted at a setting appropriate for first crop. 15
Check skid shoes are evenly adjusted at a setting appropriate for first crop. 50
Check wobble box lube level and breather position. 34
Check rear and side forming shields evenly set to desired position. 16
Grease all bearings and drivelines. 35 - 43
Check conditioner gear case lube level. 49
Check conditioner roll gap, timing, and alignment. 49
Check roll intermesh hardware is securely tightened. 49
RUN-UP PROCEDURE 51
Check hydraulic hose and wiring harness routing for clearance when raising or lowering header,
and when retracting or extending center link.
---
Check speed of wobble box pulley. 51
Check amber flasher and signal lights are functional. 50
Confirm header ID on windrower CDM. ---
POST RUN-UP CHECKS. STOP ENGINE. ---
Check for hydraulic leaks. ---
Check belt and chain drives for idler alignment and heated bearings. 44 - 45
Check knife sections for discoloration caused by misalignment of components. ---
Check manuals in windrower cab. 52
Date Checked: _________________________ Checked by: __________________________________