UNLOADING AND ASSEMBLY
Form 169078
Revision C
22
4. At valve (D), remove the cap (E) from port
“R1” fitting, and the plug (F) from “DWA” tee
fitting. Ports may not be identified.
5. Remove female coupler assemblies (G) and
(L) from auger return and reel pressure hose
bundle (H) from header.
6. Remove and discard the cap (M) and
adapter fitting (N) with O-ring, from the large
coupler (O).
7. Install large coupler (O) onto fitting at port
“R1” on valve block (D).
IMPORTANT
Make sure O-ring is on JIC threads in port R1 to
ensure a proper seal with the coupler (O). If
O-ring is missing, re-use O-ring from fitting (N).
8. Remove and discard the cap (P) and
adapter fitting (Q) from the small coupler
assembly (R).
9. Install the small coupler subassembly (R)
onto the tee (S) on valve block (D).
NOTE
Adjacent hoses may require slight
repositioning to allow access for new
hoses.
b. Proceed to STEP 16. ATTACH HYDRAULICS.
LARGE COUPLER ASSEMBLY (W)
M
N
O
SMALL COUPLER ASSEMBLY (V)
Q
P
R
O
D
R
D
S
H
L
G
DWA
E
F
D
R1
Содержание A30-D
Страница 53: ...NOTES Form 169078 Revision C 53 ...
Страница 55: ......