UNLOADING AND ASSEMBLY
Form 169078
Revision C
39
LUBRICATE THE HEADER (Cont’d)
NOTE
To prevent binding and/or excessive
wear caused by sickle pressing on
guards, do not over grease. If more
than 6 to 8 pumps of the grease gun
are required to fill the cavity, replace
the seal in the sickle head.
SICKLE HEAD BEARING (1 PLC)
SICKLE DRIVE BEARING (1 PLC)
GAUGE ROLLER BEARINGS (2 PLCS)
BOTH SIDES - IF INSTALLED
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base
A40-D HEADER LH SIDE
TINE BAR BEARING
(4 PLCS EACH TINE BAR)
Содержание A30-D
Страница 53: ...NOTES Form 169078 Revision C 53 ...
Страница 55: ......