PRE-DELIVERY CHECKS
Form 169078
Revision C
50
G. SKID SHOES/GAUGE ROLLERS
WARNING
To avoid bodily injury or death from
unexpected start-up or fall of raised machine,
stop engine, remove key and engage lift
cylinder lockout valves before going under
machine to adjust skid shoes or for any
reason.
a. Raise header, and engage lift cylinder lockouts.
b. Check that pins are installed in the same
position in all skid shoes/gauge rollers.
H. LIGHTS
The hazard lights, which are mounted on both
ends of the header, are activated by switches in
the M Series windrower cab.
Check for operation during run-up.
a. Check that pivot bolt is tight enough to hold light
support in upright position, yet allow light to pivot
out of the way of obstructions.
Содержание A30-D
Страница 53: ...NOTES Form 169078 Revision C 53 ...
Страница 55: ......