Mac allister MGT60030 Скачать руководство пользователя

Страница: 6 / 40

MGT60030

by MacAllister

Getting

started...

Do not use the power tool if the switch does not turn

it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use.

Many accidents are caused by poorly

maintained power tools.

Keep cutting tools sharp and clean.

Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed.

Use of the power tool for operations

different from those intended could result in a hazardous

situation.

Safety warnings

Safety information

Содержание MGT60030









































Результаты поиска

Содержание MGT60030

Отзывы:

Похожие инструкции для MGT60030

Бренды по названию

Популярные бренды

Mac allister MGT60030, Оригинальное руководство пользователя

Результаты поиска

Содержание MGT60030

Отзывы:

Похожие инструкции для MGT60030

Бренды по названию

Популярные бренды