Mac allister MGT60030, Оригинальное руководство пользователя

Страница: 29 / 40

EN
29
In
more
detail...
MGT60030 by MacAllister Care and maintenance
Refill the trimming line in the trimming spool
1. Remove the trimming spool (12c) from the housing (12e) as instructed in
chapter “Trimming line - Replace the trimming spool”.
2. Discard all the remaining lines (12d) from the trimming spool (12c).
3. Clean the housing (12e) and the trimming spool (12c).
4. Cut two new 3 m long trimming lines with a diameter of 1.6 mm.
5. Lead one end of the new trimming lines (12d) through the small eyelet on the
trimming spool (12c) in direction of the arrows (Fig. 27).
6. Insert two trimming lines (12d) all the way until the end then bend them over.
7. Wind all the trimming lines firmly around the trimming spool (12c) in direction
of the arrows on the trimming spool (12c) (Fig. 28).
Spare parts/Replacement parts
Power cord
Spare parts are available at an authorised dealer or through our customer
service.
If the power cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a safety hazard.
12c
12d
Fig. 27
Fig. 28