background image

MGSP18LI

 par Mac Allister

04

EN

Getting 

started...

Safety information

surfaces, such as pipes, radiators, ranges 

and refrigerators.

 There is an increased risk 

of electric shock if your body is earthed or 

grounded.

3.  Do not expose power tools to rain or wet 

conditions. 

Water entering a power tool will 

increase the risk of electric shock.

4.  Do not abuse the cord. Never use the cord 

for carrying, pulling or unplugging the power 

tool. Keep cord away from heat, oil, sharp 

edges or moving parts. 

Damaged or entangled 

cords increase the risk of electric shock.

5.  When operating a power tool outdoors, use 

an extension cord suitable for outdoor use.

 

Use of a cord suitable for outdoor use reduces 

the risk of electric shock.

6.  If operating a power tool in a damp location 

is unavoidable, use a residual current device 

(RCD) protected supply. 

Use of an RCD 

reduces the risk of electric shock. 

Personal safety 

1.  Stay alert, watch what you are doing and 

use common sense when operating a power 

tool. Do not use a power tool while you are 

tired or under the influence of drugs, alcohol 

or medication. 

A moment of inattention while 

operating power tools may result in serious 

personal injury.

2.  Use personal protective equipment. Always 

wear eye protection. 

Protective equipment 

such as dust mask, non-skid safety shoes, hard 

hat, or hearing protection used for appropriate 

conditions will reduce personal injuries.

Содержание MGSP18LI









































Отзывы: