Mac allister MGSP18LI, Руководство пользователя

Страница: 21 / 40

MGSP18LI par Mac Allister
21
EN
Getting
started...
Before you start
WARNING! Always charge the battery before storage! It's
important to disconnect the charger from the power supply
after charging finished. Cool down battery pack from a
just-operated product for approximately 30 minutes before
attempting to recharge.
Fig. 5
13
14
13a
1.
2.
3. After charging finished (this normally takes 1 hour, see below
"Indicator lights" section for charging status), disconnect the
charger (14) from power supply.
4. Press the release button (13a) and remove the battery pack (13)
from the charger (14) (Fig. 5).
2. Connect the charger (14) to the power supply.
WARNING! Check the voltage! The voltage must comply
with the information on the rating label!
NOTE: It is normal for the battery pack and charger to
become warm (but not hot) during the charging process.
Depending on temperature and existing charge level, the
actual charging time may change.