Mac allister MGSP18LI, Руководство пользователя

Страница: 28 / 40

28
MGSP18LI par Mac Allister
In
more
detail...
EN
Operation
1. Hold the product with one hand only (Fig. 14). Do not attempt to
hold the product with two hands (Fig. 15).
2. Do not hold the workpiece by hand but use suitable clamps to
secure it if required (Fig. 16).
3. Ensure the workpiece is free of obstacles like nails or screws
before operation. Remove them if required.
4. Switch the product on and wait until it runs at full speed before
placing it on the workpiece.
5. Only apply as much pressure as necessary to guide the blade
through the workpiece. Higher pressure will not increase but
lower the performance of the product.
6. Switch the product off, let it come to a complete stop and remove
the battery pack if the saw blade (12) is stuck in the workpiece.
Only then free the jammed blade.
Fig. 14
Fig. 16
Fig. 15
WARNING! Always hold the main handle firmly with one
hand. The vibration of the product will be increased suddenly
during operation.
The cutting blade will stop running due to the activation of
overload protection. Always remove the cutting blade from
the workpiece before switch on the product again.