Mac allister MGSP18LI, Руководство пользователя

Страница: 8 / 40

MGSP18LI par Mac Allister
08
EN
Getting
started...
when switched on. Otherwise there is danger
of kickback when the cutting accessory jams in
the workpiece.
4. Use only undamaged saw blades that are in
perfect condition. Bent or dull saw blades can
break, negatively influence the cut, or lead to
kickback.
5. Clamp material well. Do not support the
workpiece with your hand or foot. Do not
touch objects or the floor with the saw running.
Danger of kickback.
6. Always wait until the product has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the product.
7. Before any work on the product (e. g.
maintenance, changing the tool, etc.) as well
as during its transport and storage, lock
the On/Off switch in the off position. There
is danger of injury when the On/Off switch is
unintentionally actuated.
8. Always wear a dust mask to protect yourself
against hazards resulting from fine dust.
Maintenance and storage
1. Disconnect the product from the power supply
(i.e. remove the plug from the power supply or
the battery pack) before checking, cleaning or
working on the product and when it is not in use.
2. Disconnect the product from the power supply
(i.e. remove the plug from the power supply
or the battery pack) before carrying out
maintenance or cleaning work.
3. Maintain and inspect your product regularly.
Safety information