Mac allister MCSWP2000S-2, Руководство пользователя

Страница: 18 / 53

MCSWP2000S-2
17
EN
Getting
started...
WARNING! Always use a saw chain designed as “low-
kickback” or a saw chain which meets the low-kickback
requirements! A standard saw chain (a chain which does not
have the kickback reducing guard links) should only be used
by an experienced professional operator!
Nevertheless, a low-kickback saw chain does not completely
eliminated kickback! A low-kickback or “safety” chain
should never be regarded as complete protection against
injury! Therefore always use a low-kickback saw chain in
conjunction with other kickback protection devices such as
the front guard/chain brake!
Before you start
Assemble the guide bar and saw chain before operation.
Chain and guide bar
Use only the guide bar (4) and saw chain (3) according to the
technical data of the product.
1. Place the product on a suitable flat surface.
2. Loosen the cover (9) by turning the locking wheel (7)
anticlockwise (Fig. 1, a) and remove the cover.
3. Place the product with drive sprocket (22) facing upwards.
4. Spread the saw chain (3) out with the cutting edges of the chain
pointing in the rotational direction and slide the chain into the
groove around the guide bar (4) (Fig. 2).
Fig. 1
Fig. 2
7 9
3
4