Mac allister MCSWP2000S-2, Руководство пользователя

Страница: 28 / 53

27
MCSWP2000S-2
In
more
detail...
EN
Product functions
The chain brake is a safety mechanism activated by the front guard
(2). When kickback occurs the chain stops immediately.
The following functional check should be carried out before each
use. The purpose of the chain brake test is to reduce the possibility
of injury due to kickback.
Chain brake test
The chain brake (2) in the
disengaged position, the
product can be operated (Fig.
16).
The chain brake (2) in the
engaged position, the saw
chain is stopped as soon as the
chain brake is activated (Fig.
17).
Chain brake
WARNING! Before operating this product, always check that
the chain brake is in perfect working condition.
Fig. 16 Fig. 17
1. Make sure the chain brake (2) is disengaged. Disengage the
chain brake (2) by pulling it back towards the front handle (1)(Fig.
17).
2. Place the product on any suitable flat surface, make sure the
saw chain (3) is not touching the surface or other objects and
connect it to the power supply
as described.
3. Grasp the front handle (1) with
your left hand. Your thumb
and fingers should encircle the
handle. Grasp the rear handle
(12) with your right hand. Your
thumb and fingers should
encircle the handle (Fig. 18).
Fig. 18