Mac allister MCSWP2000S-2, Руководство пользователя

Страница: 40 / 53

39
MCSWP2000S-2
In
more
detail...
EN
2. The height difference between the tooth and the ridge is the
cutting depth. When sharpening the saw chain (3) you have to
consider the following points (Fig. 44).
- File angle
- Cutting angle
- File position
- Diameter of round file
- File depth
7. Check the saw chain for possible wear and damages. Replace it
with a new one if required. Experienced users can sharpen a dull
saw chain (see section “Saw chain sharpening”).
8. Refit the saw chain (3) and the guide bar (4) as described under
“Assembly”.
1. Have your saw chain (3) sharpened professionally at an
authorised service centre or sharpen the chain yourself.
Saw chain sharpening
NOTE: Saw chain sharpening may be required:
- after damp wood is cut (mealy sawdust),
- when handling the product becomes difficult (pulls to the
left or right),
- when the saw chain is blunt (excessive force is required to
penetrate the wood), or obviously damaged.
Never saw with a blunt chain. The saw chain is blunt if you
have to push the product into the tree and the chips are very
small.
Fig. 42 Fig. 43
a
WARNING! Only sharpen the saw chain yourself if you are
trained and have experience! Use proper tools to sharpen
the saw chain!
Right-
handcutter
Left-
handcutter
Bumper
tiestrap
Bumperdrive link
Tiestrap
Saw chain direction
Fig. 44
Care and maintenance