background image

 24 

Optional Entertainment System  

 

     Select  models  may  be  equipped  with  an  audio 
system designed to provide the ultimate spa 
entertainment experience.  Power to the entertainment 
system is supplied at spa startup so it is always ready 
for your enjoyment. 
 
     Refer to the stereo Owner’s Manual included in the 
Coleman® Spas Owner’s Manual packette for 
instructions on programming and using the 
entertainment system. Read all instructions carefully 
before using the Entertainment System and Save the 
Instructions! 
 

The Entertainment System includes a stereo 

remote control that will operate the stereo by pointing 
the remote at the equipment enclosure located on the 
front skirt panel of the spa, or at the IR receiver on the 
inside lip of the spa.  Refer to the stereo Owner’s 
Manual for instructions. 
 

Note:

  The remote control is not waterproof and 

should not be used from inside the spa. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

        Caution 

Risk  of  electrical  shock.

 Do not leave 

stereo compartment door open. 
 

        Caution 

Risk of electrical shock.

 Replace 

compenents only with identical components. 
 

        Caution 

Risk  of  electrical  shock.

 Do not operate 

the audio/video controls while in the spa. 
 

        Caution

 

When the power supply connections or 

power supply cord(s) are damaged; if water is entering the 
audio/video compartment or electrical equipment 
compartment area; if the protective shields or barriers are 
showing signs of deterioration; or if there are signs of other 
potential damage to the unit, turn off the unit and refer 
servicing to a qualified service personnel. 
 

        Warning 

PREVENT  ELECTROCUTION.

 Do 

not connect any auxiliary components (for example cable, 
additional speakers, headphones, additional audio/video 
components, etc.) to the system. 
 

        Warning

  These units are not provided with an 

outdoor antennae. When provided it should be installed in 
accordance with Article 810 of the National Electric Code, 
ANSI/NFPA 70. 
 

        Warning

  Do not service this product yourself as 

opening or removing covers may expose you to dangerous 
voltage or other risk of injury. Refer all servicing to 
qualified personnel. 
 

        Warning

  This unit should be subjected to periodic 

routine maintenance (for example, once every 3 months) to 
make sure the unit is operating properly. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание 2007 Elite spas

















































Отзывы: