MA Digital Dimmer Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 20

MA Digital Dimmer Скачать руководство пользователя страница 8

MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de

88888

** MEMORIES

0FF

CHASE

>

<

MEMORY 1

>

<

MEMORY 2

>

<

MEMORY 3

>

<

MEMORY 4

>

<

MEMORY 5

>

<

MEMORY 6

>

<

MEMORY 7

>

<

MEMORY 8

>

<

OUT: OFF

>

<

4.3 The Memory Menu (3rd Menu)

This menu appears after the channel menu, if the menu button is pressed (provided that the Supervisor
mode is activated, see 4.4.6).
In this menu 12 real level memories can be stored and recalled.
Furthermore, a chase (sequence) can be started containing the internal stored memories. The running
speed, fadetime and the number of steps can be programmed.

Preselect no memory or
chaser "off"

Preselect chaser "on"

Preselect memory 3

003.0 GO

If now "Edit" is pressed the Chaser edit menu is
displayed it is a submenu of the Memory menu. Here
the 3 chaser parameter can be programmed.
- "Speed" (Steptime) 0,1...999 seconds,
- "Fade" (crossfade time) 0...100%
- "Steps" (number of steps) 0...12 ,
e.g. Steps = 3 means, that the case consist out of the
first three memories.
The way to control this menu is the same as in the
Channel menu (2nd menu).
"Save" returns to the Memory menu.
The "menu button" leads to the Top menu.

Leads back to the Top
menu.

Programming contents of
a memory

(Programming of memories :
Select a memory with the
Encoder , press the left
button and then also the
right button, "Store"). This
will store the memory
permanently.

Encoder selects (without
pressing a button ) between
12 Memories, a chase and
"off" (nothing).

Pressing this button and
simultaneously turning the
encoder changes the
crossfade time for the
memories.

Exception

: The chase is

selected. Now "EDIT" is
displayed here.

This button (Go) will recall
the selected memory, chase
or "Off" function (depending
on the selection)
A crossfade time is activated
(here 3 sec.).

Attention!

The memories or chaser will
be active, until "off" or
another memory is started.
The activated memory will be
stored permanently, when this
menu is left.

«
...
6
7
8
9
10
...
»

Содержание Digital Dimmer





















Отзывы:

Нет отзывов