M86 Security SWG Скачать руководство пользователя страница 64

Страница: 64 / 134

S W G U s e r G u i d e

Chapter 11: Configuring the Log Server

In the

Log

Archiving

tab of the Log Properties screen, do the following:

1. Specify the Log Archiving Locations as follows. Repeat these steps for each Archive location:

a. Click the

icon.

b. If archiving should be enabled to this Archive, select the

Enable

checkbox.

c. In the

Connection

Method

field, select the method that the Log Server uses to connect to the

Archive location:
•

FTP

— connect using regular File Transfer Protocol.

•

FTP

Passive

— connect using File Transfer Protocol. This is where there is a firewall

located between the Policy Server and the remote FTP site.

•

Samba

— connect using Server Message Block (SMB) communication protocol.

•

SFTP

— connect using Secure File Transfer Protocol.

d. Specify the Archive file Location, the User Name, and the Password. The format of these values

that you specify depends on the connection method:

2. Select the Archive Format:

•

Extended

— includes all available information on each logged transaction. Required when

working with M86 security reporter.

•

Basic

— includes only a subset of details on each logged transaction.

For more details on each format, see the

Management

Console

Reference

Guide

3. To have the Archive location tested when you save the definition, select the

Test

Archive

Loca

tion

Save

checkbox. Otherwise, ensure that the checkbox is cleared.

4. In the

Log

Archive

Schedule

area, specify when archiving should be performed. You can specify

a daily time or an interval between archive processing.

5. Do either of the following:

• To have log messages sent to Archive, continue with

Enabling and configuring log retention

Connection

Method

Archive

Location

Format,

User

Name

and

Password

FTP

Passive

, or

SFTP

Archive

Location

format is:

• For

FTP

Passive

<server_ip_address>

/dir

(for example,

10.194.5.104/Sarah_FTP).

• For

SFTP

<server_ip_address>

(for example, 10.194.5.104/).

User

connect

with

is the user name used when connecting to the

Archive Location.

Password

should be the password used by the above user.

Samba

Archive

Location

must include the server IP address and directory for

your selected location, in the following format:

<server_ip_address>

/dir

, (for example, //192.168.1.10/archive).

User

connect

with

must include the workgroup name and the user

name used when connecting to the Archive Location, in the following

format: workgroup/user, for example, marketing/nicole.

Password

should be the password used by the above user.

Содержание SWG







































































































































Результаты поиска

Содержание SWG

Отзывы:

M86 Security SWG, Руководство пользователя, Страница: 64 / 134

Результаты поиска

Содержание SWG

Отзывы: