• While Configuration select mode, Channel number cannot be changed by using
[UP]/[DN] switch.
• In each Configuration, Channel number is separately memorized.
• Only when
"F"
icon and Channel Indicator ore blinking while Configuration select
mode, Configuration can be changed by using [UP]/[DN] switch. When " F " icon
and Configuration Indicator are not blinking while Configuration select mode,
[UP]/[DN] switch is not active.
• When Power On is done while [Fl switch is not pressed, 1hen it becomes normal
state of the receiving and transmitting.
8.14 Configuration code indication
The character of the Configuration code is displayed on Channel Indicator is as
follows.
Configurotlon 1
(EU Configuration)
Configuration 4
(EC Configuration}
8.15 Beep Tone On/Off
Configuration 2
(PL Configuration)
Configuration 5
(UIC Configuration)
It is a function to switch Beep Tone enable/disable.
Configuration 3
(D Configuration)
- Tum on the power whlle pressing the (UPI IWltch only: Beep Tona enable.
- Tum on the power whlle pressing the (DN] swftch only: Beep Tone disable.
• While Beep Tone disable, all the Beep Tone is not sound.
• When power switch is turned on without pressing (UP)/(DN] switch, previous setting
as Beep Tone on or off is kept.
P.12
