8. OPERATIONS
8.1 Common Items
1. Only for Multi Configuration mode, when Power On is done while [Fl switch is not
pressing, then it becomes normal state of the receiving and transmitting. When
Power On is done while [Fl switch is pressing, then it becomes Configuration select
mode. At this state, it is in mute state, and normal operation of the reception and
the transmission cannot be done. [Only for Multi Configuration mode]
2. Except for Multi Configuration mode. even if Power On is done while [Fl switch is
pressing or not, then it becomes normal state of the receiving and transmitting.
[Except for Multi Configuration]
3. In the state that the microphone is not connected, the audio is not output from
speaker. Moreover, the audio is not output from speaker while [PIT] switch is being
pressed.
4. Connecting the external speaker automatically disconnects the internal speaker.
5. In the state that the transmission is prohibited, " TX" icon and the Channel Indicator
blink while being pressing [PIT] switch.
8.2 Power On/Off
- Turn the Volume knob clockwise unit turns on and the display comes on.
- Turn the Volume knob counter-clockwise unHI turns It clicks and the unit tums off.
1. Rotate clockwise [VOL, OFF] knob from switch off producing a click to tum power
on. [Except for Multi Configuration mode]
Rotate clockwise [VOL, OFF] knob from switch off producing a click to tum power
on while [Fl switch is not pressing. [Only for Multi Configuration mode]
-+The power of the transceiver will be turned on. It becomes normal state that can
be received and transmitted.
The Power On Tone is sounding and the Configuration code character is indicated
in Channel Indicator. About two seconds later, the Last Selected Channel number
is indicated in Channel Indicator.
2. Rotate counterclockwise [VOL, OFF] knob from switch on producing a click to tum
power off.
-+The power of the transceiver will be turned off.
P.7
