- It Is adjusted to RF Gain Up when this knob Is turned to the clockwlse direction.
• Normally, this knob is on maximum (fully clockwise).
8.8 CB Channel select
- Push the [UP] switch to move up the channel list.
- Push the [DN] switch to move down the channel list.
8.9 AM/FM Mode [Except for EC, UK Configuration]
- [AM
I
FM] slide switch is used to switch modulation mode AM/FM. This function is
effective In AM/FM model.
• 11
AM" icon appears in the LCD display when the AM is selected.
• 11
FM" icon appears in the LCD display when the FM is selected.
• 1n D Configuration, only CH1-CH40 is possible transmitting and receiving with AM
Mode. It becomes FM Mode in channel other than CH1-CH40 regardless of the
position of [AM
I
FM] slide switch. [D Configuration]
8.10 CEPT /ENG select [Only for UK Configuration]
Use [AM
I
FM] slide switch to switch the CEPT [CEPT] Mode and ENGLAND (ENG]
Mode for UK Configuration.
- Move the [CEPT
I
ENG] switch to CEPT poslHon: Set to CEPT Mode.
- Move the [CEPT
I
ENG] switch to ENG position: Set to ENGLAND Mode.
* When [CEPT
I
ENG] slide switch is changed while TX Mode. then TX Mode is finished
and CEPT/ENG Mode changes.
• 11
FM" icon always appears at UK Configuration.
" UK " icon turns off while CEPT mode.
II
UK " icon turns on while ENGLAND mode.
8.11 TX (Transmitting)
- Tune the radio to the channel you want to transmit on. and listen to make sure the
channel Is clear.
P.9
