M-system PU-2A, Руководство по эксплуатации

Страница: 38 / 40

38 PU-2A USERS MANUAL EM-9255-C Rev.14
ITEM MDFY. DATA INPUT DISPLAY CONTENTS
12 P input zero freq. Lower range input frequency (= output 0%)
JPAD JRPD
(JARP JAPD)
JPRD JPSM
JFRD
Enter data 0 for
JPSM, JPRD.
DATA, ENTR Current set value
DATA, data, ENTR XXX.X xHz Entering frequency
data: 0 – ±9999 (4 digits max.) with decimal point
xHz: Frequency unit specified in ITEM 11
13 P input span freq. Upper range input frequency (= output 100%)
JPAD JRPD
(JARP JAPD)
JPRD
JPSM
JFRD
Enter denominator
of the pulse rate
for JPSM, JPRD.
DATA, ENTR Current set value
DATA, data, ENTR XXX.X xHz Entering frequency
data: 0 – 9999 (4 digits max.) with decimal point
xHz: Frequency unit specified in ITEM 11
14 P zero count Lower range count (= output 0%)
JPQD JRQD
DATA, ENTR Current set value
DATA, data, ENTR xXXXXXXX counts Entering count value
data: 0 –
± 1048575
x: Negative sign (–); positive (+) is not indicated.
15 P span count Upper range count (= output 100%)
JPQD JRQD
DATA, ENTR Current set value
DATA, data, ENTR XXXXXXX counts Entering count value
data : 0 – 1048575
18 P zero bias adj VR Output fine adjustment (zero)
JPAD JPQD
JRPD JRQD
DATA, ENTR Current set value in %
DATA, data, ENTR XXX.XX % Entering desired bias, ±15.00% (85.00 – 115.00% of zero frequency
(=100.00%)
data : 85.00 – 115.00
DATA, UP
DATA, DOWN
Display data increases.
Display data decreases.
19 P gain adj VR Output fine adjustment (span)
JPAD JPQD
JRPD JRQD
DATA, ENTR Indicating current set value in %
DATA, data, ENTR XXX.XX % Entering desired gain, ±15.00% (85.00 – 115.00% of span frequency
(=100.00%)
data : 85.00 – 115.00
DATA, UP
DATA, DOWN
Display data increases.
Display data decreases.
20 P drop out timer Specifying cutout time
JPAD JRPD
JPRD JPSM
JFRD
DATA, ENTR Indicating current set value
DATA, data, ENTR XXXXX msec. Entering desired cutout time (100 msec. – 300 sec.)
data : 100 – 300000 (msec.), 5 msec. increments
DATA, UP
DATA, DOWN
Display data increases.
Display data decreases.
21 P sampling timer Specifying sampling time
JPAD JRPD
JPRD JPSM
JFRD JRQD
DATA, ENTR Indicating current set value
DATA, data, ENTR XXXXX msec. Entering desired sampling time (50 msec. – 100 sec.)
data : 50 – 100000 (msec.), 5 msec. increments
DATA, UP
DATA, DOWN
Display data increases.
Display data decreases.
22 P updating timer Specifying output update time
JPAD JPQD
JRPD JRQD
DATA, ENTR Indicating current set value
DATA, data, ENTR XXXXX msec. Entering desired output update time (50 msec. – 100 sec.)
data : 50 – 100000 (msec.), 5 msec. increments
DATA, UP
DATA, DOWN
Display data increases.
Display data decreases.