Comply with safety distance between hob and hood.
See chapter 11.1
A Circulating air filter mode
B Exhaust air mode
A Installation for circulating air filter mode
B Installation for exhaust air mode
fi90520
Figures are for illustration purposes only.
English
Operating instructions / users manual Cooker Hoods
16. General Installation Instruction
Chimney Cooker hoods
GB
(B1)
Via an exhaust air shaft through the house roof
(B2)
Laterally through the house wall to the
outside.
1.
Hold the hood suspension plate
1a
against the wall,
mark the holes with a pencil, drill the holes, insert plugs
and screw the hood suspension plate securely to the
wall and hang the hood on the hooks
1b (1c)
2.
By turning clockwise connect the exhaust air hose
2a
between the one-way valve
2b
and exhaust air hose
(
Figs. B1 & B2
)
3.
Fix strut
3a
with screws
3b
to the chimney shaft;
mount chimney shaft
3c
together with telescopic shaft
3d
to the hood
3e
and fix with screws
3f.
4.
Screw mounting bracket
4a
with plugs and screws to
the wall at the desired height; pull out telescopic shaft as
far as the mounting bracket and fix to the mounting
bracket with screws
4b.
Attention!
Install carbon filter
(A1)
only with circulating
air mode
Same procedure as described under the following
chapter
B
. However, omit step
2.
In addition fit the carbon filter(s)
A2
before mounting the
grease filter
(Fig. A1)
5.
Connect appliance cable to the mains supply and fit
grease filter
A2.
1.
Clean the environment thoroughly prior to installation in order that no dust or building waste can be drawn in.
2.
The exhaust air hose must not be routed through a shaft together with gas pipes, hot air air pipes etc.
3.
The exhaust air hose must be routed as straight as possible away from the hood or with a maximum bend outwards of
120° and fixed to the external wall.
4.
To avoid grease accumulations in corners, on installation make sure that the hood hangs horizontally.
B2
B1
1
1a
1b
2
2a
2b
3d
3e
3c
3
3b
3f
4
4a
3a
4b
A1
A2
<65 cm>
1c
12
