M1EXV-4
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-6040-B Rev.2 P. 3 / 37
COMPONENT IDENTIFICATION
Body
Lockslider
Connection Diagram
(Side)
Base (M1E-BS2)
Specifications
Display
Front Buttons
*
Base does not come with the unit.
Please order separately.
■
TERMINAL ASSIGNMENTS
5
10
1
6
7
2
3
4
8
9
15
20
11
16
17
12
13
14
18
19
No.
FUNCTION
No.
FUNCTION
1
Ch3 Input +
11
Ch1
2
Ch3 Input –
12
Ch1 Output –
3
Unused
13
Ch4
4
Ch1 Input +
14
Ch2
5
Ch1 Input –
15
Ch2 Output –
6
Ch4 Input +
16
Ch3
7
Ch4 Input –
17
Ch3 Output –
8
Unused
18
Ch4 Output –
9
Ch2 Input +
19
Power +
10
Ch2 Input –
20
Power –
INSTALLATION
The unit can be removed from the base by pulling out while pressing the lockslider on the top thereof.
The base does not come with the unit. Please order separately.
■
DIN RAIL MOUNTING (PARALLEL)
• Mounting the unit
A) Hook the upper hook at the rear side of the base onto the
DIN rail.
B) Push the lower part of the unit in the direction of the ar-
row until the base is firmly fixed to the DIN rail.
A
B
• Removing the unit
A) Push down the lower slider using a minus screwdriver.
B) Pull out the lower part of the unit.
C) Remove the upper part of the unit from the DIN rail.
A
B
C
■
WALL MOUNTING
Refer to “MOUNTING REQUIREMENTS unit: mm (inch)” on page 4.
Pull out the upper and lower sliders from the base and fix them with M4 screws (Torque: 1.4 N·m).
