Safety information
6
IDM 510-004-3
English language
Operation and maintenance manual
Safety Warnings for Handling and Installation
– The manufacturer has attached special attention to the packaging of the machine, to
minimise the risks associated with the shipping, handling and transport phases.
– The personnel authorised to handle the machine (loading and unloading) must have
acknowledged technical skills and professional ability.
– Before handling, please read the instructions, in particular those on safety, contained
in the installation manual, on the packages and/or on the removed parts.
– In order to make transport easier, the equipment can be shipped with a few disassem-
bled and properly protected and packaged components.
– Loading and transport must be carried out with equipment of adequate capacity by
anchoring it to specific points indicated on the packages.
– DO NOT attempt to by-pass the instructions concerning the lifting requirements and
special points provided for lifting and handling each item and/or disassembled part.
– Slowly lift the pack to the minimum necessary height and move it very carefully in order
to avoid dangerous vibrations.
– The packs being shipped must be properly fastened to the means of transport in order
to ensure safe conditions during transfer and the integrity of their contents.
– Certain steps might request one or more operators, who must be previously trained
and informed on the tasks they will have to perform.
– Download packages in the immediate vicinity of the machine setting, which must be
sheltered from bad weather.
– Do not stack the packs onto each other in order to avoid any damage and to avoid the
risk of sudden and dangerous movements.
– In case of prolonged storage, regularly check that the component stocking conditions
do not change.
– The installation area is to be prepared so as to be able to carry out the operations as
specified in the manuals and in conditions of safety.
– Ensure that the installation environment is protected against atmospheric agents, free
of corrosive substances and free of any risk of explosion and/or fire.
– Make sure that the installation area has a suitable ventilation to avoid the concentra-
tion of unhealthy air for the Operators.
– Signal and delimit the installation area in a proper way in order to prevent non author-
ised personnel from accessing the installation area.
– The connections to the power sources (electric, pneumatic, etc.) must be performed
correctly, as shown in the diagrams and in compliance with the regulatory and legal
requirements in force.
– ONLY qualified and experienced personnel are allowed to carry out the electrical con-
nections.
– After completing the connections, perform a general check to ensure that all the inter-
ventions have been carried out properly and that the requirements have been met.
– The installation manager, before commissioning, must check that all the safety devices
are properly installed and functioning.
– At the end of operations check that there are no other tools or other material near the
moving parts or in dangerous areas.
– Dispose of all packing in accordance with the laws in force in the country of installation.
–
The non-compliance with the information provided herein may lead to risks for
the safety and health of the persons involved and may also lead to economic
damages.
