15
IDM 510-074-1
Technical Specifications
English language
Operation and maintenance manual
A) Work top:
it is equipped with conveyor belts
B
that enable case transfer.
B) Lower conveyor:
it moves cases during the sealing operation.
– Unit is equipped with belts operated by a gear-motor.
C) Upper conveyor:
it moves cases during the sealing operation.
– Unit is equipped with belts operated by a gear-motor.
D) Centring guides:
they keep the case aligned and centred.
E) Lateral pressure rollers:
they keep the upper flaps close to each other during the
sealing operation.
– Pressure rollers can be adjusted to the width of the cases to be sealed.
F) Head:
it can be adjusted to the height of case.
– Head is equipped with upper sealing unit and with lateral pressure rollers
E
.
G) Sliding crossbar:
it supports head
F
and it can slide in order to adjust its height ac-
cording to the cases to be sealed.
H) Hand wheel:
control used to adjust the height of head
F
.
L) Sealing units:
they are fitted with an adhesive tape holder that seals the lower and
upper part of the cardboard cases and/or cartons.
– Each sealing unit is equipped with devices that apply and cut the adhesive tape.
For further details see section “Sealing unit”.
M) Support feet:
they can be adjusted in order to move work top to the required height.
N) Electrical Panel:
contains the electrical components for the power and control fea-
tures of the machine.
See “Control description” for further details.
P) Electrical cable:
it is used to connect the machine to the network power supply.
Q) Emergency stop button:
safety control that, in case of an imminent risk, stops all
parts whose function might constitute a risk.
The functionality and features of the (electrical, pneumatic, etc.) systems are indi-
cated in the corresponding diagrams enclosed.
