23
IDM 510-074-1
Use and functioning
English language
Operation and maintenance manual
Start and stop
The figure shows the points of intervention and the description shows the proce-
dures to be adopted.
▀
Start-up
1.
Make sure that the machine has
been adjusted to the dimensions of
the cases to be sealed.
2.
Turn the main disconnector
A
to po-
sition
“I”
(ON) to connect power sup-
ply.
– The conveyors (lower and upper)
start.
3.
Close lower flaps and insert the
product into case.
4.
Feed on the case (during this opera-
tion upper flaps must be kept closed)
until it is picked up by conveyor belts.
Attention
Warning
To prevent the risk of abrasion, touch
the rear of the case when handling it.
▀
Stop
– Complete the sealing operation in
progress.
– Rotate main disconnector
A
to posi-
tion
“O”
(OFF) to deactivate the
power supply.
– The conveyors (lower and upper)
stop.
