Please pay extra attention to the differences between how you program the faders or
rotary controllers and how you program the buttons. Once the controller you want to edit
has been selected, you can change the assigned MIDI CC number as described in the
next sections.
Selecting a Controller for Editing
Before you can assign a MIDI CC to one of the Keystation Pro 88’s assignable
controllers, you will need to select the controller for editing. There are two ways to select
a controller:
1. Press the CONTROL SELECT buttons (GLOBAL C CHANNEL ASSIGN).
The LCD will display the CONTROLLER symbol. The LCD symbol will flash to
indicate the controller settings can be altered (Edit Mode). The three-digit display will
show the number of the currently selected controller.
2. Type in the number of the controller using the numeric keypad or the +/- buttons.
or
1. Simply move a fader, a rotary controller, or press an assignable button.
Assigning MIDI CCs
1. Press CONTROL ASSIGN. The LCD will flash the CC symbol and the three-digit
display will indicate the currently assigned MIDI CC number.
2. Type in a new MIDI CC value using the numeric keypad or the +/- buttons. The MIDI
controller number you select will be assigned to the currently selected controller,
shown by the number on the small, two-digit display.
Note: If you have a Group A controller selected, it is possible to assign a different MIDI CC for each
zone. For more information on Group A controllers, please refer to the Group A controllers section of
this guide.
Assigning an Individual MIDI Channel
1. Select the controller you want to edit as described earlier.
2. Press CHANNEL ASSIGN. The LCD will display the CHAN symbol and the 3-digit
display will show the current channel assignment of the selected controller. This will
be preceded by a “c,” (for channel) or a “z” if the controller is assigned to a Global
Zone channel.* The small two-digit display will show the currently selected controller
number (each fader, rotary knob and button has its own controller number listed next
to it) for assignment.
3. Type the MIDI channel number (00-20) you want the controller to send on, using the
numeric keypad or the +/- keys.
Note: If you select channels 17-20, the controller is assigned to the Global Zone channel for
Zone 1, 2, 3, or 4 respectively.
Содержание Keystation Pro 88
