M-Audio Keystation Pro 88, Руководство для продвинутых пользователей

Страница: 19 / 27

Saving a Setup
Once you have named all your presets and organized them in the desired order, click
“Save” to save the content. Alternatively, you can click on the “File” menu and select
“Save” to save the file with the previously assigned file name, or “Save As” to assign the
memory dump a new file name. The shortcut key to save Bank 1 is CTRL+S. Make sure
you give the file a name that allows you to quickly identify your collection of setups.
Loading a Setup
To load a memory setup file back in to the librarian, click on the “Load” button and select
the required file. The loaded preset setups will appear in the Bank Window. You can
then either send it directly to the Evolution device by clicking send, or edit it.
Alternatively, select Open from the File menu. The shortcut key for loading is CTRL+O.
Be sure to check www.m-audio.com or www.evolution.com for future updates to the
Librarian software.
6 MIDI In/Out and MIDI Messages Explained
MIDI In/Out Signal Flow Diagram
The MIDI In and MIDI Out ports have different uses depending on how you intend to
connect and power the Keystation Pro 88. The diagram below shows the different
routing options.
About the MIDI In Port
The MIDI In port can be used to interface another MIDI device with your computer via
the USB port. Data received from the MIDI In will be transmitted via the Keystation Pro
88 to the computer.
When you select the MIDI devices section of your MIDI host, you will see two Keystation
Pro 88 USB MIDI Inputs. The first MIDI input in your MIDI host is used to receive the
Keystation Pro 88 controller data. The second MIDI input in your MIDI host is used to
receive data from MIDI devices connected to the Keystation Pro 88's MIDI In plug. In this
way, the Keystation Pro 88 acts as a MIDI-to-USB interface for the other MIDI device.