MIDI controllers 98 and 99 represent the NRPN LSB and NRPN MSB. MIDI controllers
100 and 101 represent the RPN LSB and MSB. (Reference the MIDI Controllers list in
Appendix D.)
An NRPN or RPN controller message is sent with a user-specified value. A further
controller message and value needs to be sent to specify the value adjustment. The
value is specified by controller number 6 (Data entry) for coarse adjustments or number
38 for fine adjustments.
To transmit NRPNs on the Keystation Pro 88, enter the appropriate NRPN LSB by
pressing the LSB/DATA button twice, or enter the NRPN MSB by pressing the
MSB/DATA button twice. As you move the Keystation Pro 88 controller, an appropriate
NRPN message will be sent out. Assign NRPN coarse to make big sweeps, or NRPN
fine to make slight adjustments.
SysEx Explained
System Exclusive (SysEx) messages were defined in the MIDI specification to allow
individual devices to have individual control via MIDI. The format of SysEx messages
allows for virtually any function to be performed via MIDI, as long as the receiving device
is able to translate the SysEx message. This allows devices to send audio sample
memory data, memory dumps, controller settings, and much more. It also allows the
controllers of one device to be controlled by another.
It is not possible to program your own specified SysEx message into the Keystation Pro
88. However, you can access pre-programmed SysEx messages by assigning the
appropriate MIDI CC to a controller (see Appendix B).
It should be noted that a SysEx message is not transmitted on any specified channel. All
SysEx messages contain a Device ID used to single out devices that respond to the
SysEx message; all other devices are ignored. If you are using a SysEx message on the
Keystation Pro 88, the Global Channel is ignored. When you press CHANNEL, instead
of entering a channel for the controller, you will enter a Device ID instead. This is
indicated by the absence of the CC symbol.
Device IDs range from 00 to 127. 127 is the default device number setting on the
Keystation Pro 88. This setting transmits the SysEx message to all devices. Though it is
not possible to program the controllers of the Keystation Pro 88 with your own SysEx
messages, there are software applications that can receive a MIDI input signal and
transmit a different, user-defined message. Depending on the controller you are using,
you may be able to program your SysEx messages into the translator software, and then
translate the incoming data from the Keystation Pro 88 into SysEx data.
Содержание Keystation Pro 88
