3. Press the DATA MSB button twice to assign the number for the RPN/NRPN MSB.
4. Press the DATA LSB button twice to assign the number for RPN/NRPN LSB.
5. Press the CHANNEL ASSIGN button to assign the MIDI channel the message
should be sent on.
You will find most data sheets for synths that make use of NRPNs will give the MSB and
LSB values that you should enter into the DATA MSB and DATA LSB.
Some manuals may only give the hex (hexadecimal) values. The Keystation Pro 88
requires you to enter the decimal value and not the hex value, but you can easily convert
hexadecimal values to decimal using the Windows calculator. (Simply select “Scientific
Mode,” then select “hex” and enter the hexadecimal value you need to convert. Press
the “Dec” button to convert it to a decimal value.) Enter this converted decimal value into
the Keystation Pro 88. The table listed in Appendix C can also assist with hexadecimal
value conversions.
Assigning a Note to a Button
The following shows how to set a button to transmit a note on when pressed, and
transmit a note off when released.
1. Press the CONTROL SELECT button and then press the button labeled A41 or
STOP on the transport (the transport buttons are the assignable buttons on the
lower left hand side of the Pro 88, near the Pitch Bend and Modulation Wheels). The
display will show that you have selected controller A41.
2. Press the CONTROL ASSIGN button and enter “147.” This is the MIDI CC number
that corresponds to Note On/Off mode, as shown in Appendix B.
Содержание Keystation Pro 88
