background image

Muting All Controllers

The  Control  Mute  function  allows  you  to  alter  the  position  of  a  MIDI  controller  without
affecting the  settings in  your software. To  Mute all faders and rotary controllers, press
the CTRL MUTE buttons.

The  Control  Mute  function  does  not  affect  buttons.  If  an  assignable  button,  a  function
button,  or  a  key  is  pressed,  the  controllers  are  turned  back  on  and  the  Control  Mute
function is terminated until the Control Mute buttons are pressed again.  Alternatively, to
deactivate the Control Mute function you can press the CTRL MUTE buttons a second
time and turn the controllers back on.

When you first press the CTRL MUTE buttons, you will see that the LCD display list is
“OFF.”   This indicates that the Keystation Pro 88 is not sending out MIDI data. This is a
very  useful  feature  if  you  decide  to  switch  between  presets  on  the  Keystation  Pro  88
when the controllers are out of position. Control Mute enables you to move the controller
to a position relative to the software's controller value, rather than causing the software's
controller value to jump.

You  can  also  use  this  feature  for  creative  mixing  or  live  performance.  If  you  use  the
Keystation  Pro  88  as  a  conventional  volume  mixer,  engage  the  Control  Mute  function,
change the volume up or down on various channels and press the SNAP SHOT buttons.
This method of mixing is very dynamic and cannot be done via a conventional mixer.

Drawbar Mode

When in Drawbar mode, the sliders of the Keystation Pro 88 will be reversed such that 0
is at the top, while 127 is at the bottom.

To  engage  Drawbar  mode,  press  the  CHANNEL  ASSIGN  and  PROGRAM  buttons
simultaneously.

When  Drawbar  mode  is  engaged,  the  LCD  display  shows  the  fader  symbol  (below).
Press the DRAWBAR buttons again to disengage Drawbar mode.

Drawbar mode is meant for use with Hammond organ synths that have drawbars.
Note: When recalling a preset, Drawbar Mode is only recalled as part of Group C. For
more information on Groups, please reference the “Programming and Editing” section of
this guide.

Содержание Keystation Pro 88




























Отзывы: