C MX 5710 Reference Manual. Rev 1.0
Page 29 of 36
Timing Tab
The Timing Tab provides an overview of the video and audio delays in relation to
each other. The displayed delays are displayed:
Processing Delay
Auto Compensation Delay
User Delays
Total Delay
In addition to providing a complete overview of the timing, the timing tab can be
used to setup all timing related configurations.
Device Event Tab
The Events Tab is where the module alarming and error notifications are
configured for the module. Any of the possible Events that the device can
generate can be disabled here, which will declare such Events as irrelevant.
Once an Event has been disabled in this Events-Tag, the Event will not be
reported to the APPolo control system, it will not be logged in the logfiles, and it
will not even influence the local LEDs of the device.
For all Events that are enabled (which is the default): as soon as the monitored
condition becomes critical (e.g. input signal lost), the Event becomes ACTIVE.
This change of state generates a message in the APPolo Control System. This
message is stored in the APPolo Server logfile. Later, when the condition is not
critical anymore (e.g. input signal present again), another message is logged in
the APPolo Event System, and also saved in the logfile.
Figure 24: Timing Tab
