Lynx Side Burner Accessory, Инструкция по использованию и установке

Страница: 15 / 28

15
how long
Is your run?
Keep all gas supply lines as
short as possible because
gas lines lose pressure over
distance and with each elbow
and tee that is added. this drop
in pressure affects accessory
performance.
(see indeX: “gas
supply line Runs” for further details.)
if shipMent arrives daMaged
vIsIble loss or damage:
Be certain any visible damage to the carton is noted on freight bill or express receipt and signed by
the person making delivery.
file claim foR damages immediately, regardless of extent of damage.
ConCealed loss or damage:
if damage is unnoticed until the accessory is unpacked, notify the transportation company or carrier
immediately and file a “concealed damage” claim with them. This should be done within (15) days
of the date delivery is made to you. Be sure to hold on to the container for inspection. we cannot
assume responsibility for damage or loss incurred in transit.
(see indeX: “obtaining service from lynx” for
further details.)
warning
►
Never install this product into a combustible enclosure. Doing so could result in fire, property
damage and personal injury.
►
never locate the accessory under a roof or overhang, in a building, garage, shed or other
such enclosed area.
►
Always maintain the required clearances from combustibles as detailed. Accessories are
designed for outdoor use only. neveR use in a garage, building, shed, breezeway, or other
enclosed area. Do not use this equipment under any overhead combustible construction.
►
installation must conform with local codes or, in the absence of local codes, with either the
national fuel gas code, ansi Z223.1/nfpa 54, or natural gas and propane installation
code, csa B149.1, or propane storage and handling code, B149.2, in canada.
where’s the wInd?
when selecting a suitable
location, consider important
factors such as exposure to the
wind and foot-traffic patterns.
if you have a freestanding
grill, position it so the prevail-
ing wind blows into the front
control panel (at your back
when grilling), supporting the
proper front-to-rear airflow.
Built-in accessories located
in areas with prevailing winds
should be protected by a wind
barrier.
are you “on-the-level”?
proper leveling during instal-
lation is critical. an accessory
that is out of level will cause
erratic burner combustion and
inefficient, uneven heating. A
carpenter’s spirit level should be
used to level the accessory both
front-to-back and side-to-side.
If the floor is uneven or has
a decided slope, re-leveling
may be required each time you
move a freestanding unit.
before You start
iMportant notes