Lynx Side Burner Accessory, Инструкция по использованию и установке

Страница: 3 / 28

3
how to light Your grill accessorY
1) Before each use, complete the checklist below.
2) make sure all burner control knobs are in the “off” position.
3) push and hold the control knob for 2-5 seconds, allowing the igniter to heat up
4) turn the knob to the “lite” position
5) after ignition set the knob to the desired setting
►
Do you smell gas? If yes, shut off everything and call the gas company or a qualified
plumber to check for leaks, if not please continue
►
are you prepared to stay with the side burner during the entire cooking process?
if not, gather what you need before starting the lighting process. if yes, please
continue.
►
is your cooking area free and clear of any combustibles, besides your food, that
might ignite? if no, clear the area before starting the lighting process, if yes, please
continue
►
do all control knobs turn freely? if not, call for service; if yes, please continue.
►
if you are using a portable propane cylinder, is it connected and leak tested? if not,
check the connection before continuing. if yes please continue.
►
do you know where your side burner’s main gas supply shut-off valve is located? if
not, locate it before continuing. if yes, please continue.
►
are all burners properly seated in the side burner? if not, seat the burners properly
before continuing. if yes please continue.
►
is the wind blowing just lightly and not blowing on the side burner? if not, wait until
the wind subsides or turn your free-standing grill so the wind goes into the front of
the grill. if yes, please continue with the lighting process.
checklist before each use (for Your safetY)
33487 03/2011
will change squares to triangles