Lynx LHEM48, Руководство по эксплуатации и установке

Страница: 25 / 36

CARE & USE/INSTALLATION
|
25
FEATURES
CONTINUOUS PILOT FEATURE:
In some cases such as locations where severely cold weather or fog persists, it may be an advantage for you to set your
heater so the small pilot flame stays continuously ON. This keeps the pilot area warm and allows immediate start-up of
your heater.
• To activate or deactivate the Continuous Pilot Feature, with the transmitter either ON or OFF, press and hold the
MODE/SET and UP Buttons simultaneously for 5 seconds. This can also be switched on the internal module.
• LCD Display: When activated, CONT. PILOT will be displayed in the MODE Zone.
• Take note that when heater is turned off (MANUAL OFF or THERMOSTAT OFF) the pilot flame remains on.
CHILD SAFETY LOCK FEATURE:
The Child Safety Lock Feature allows you to lock the buttons and the touch screen of the remote control transmitter to
avoid unsupervised (or accidental) operation of your heater system.
• Child-Lock operation prevents any user input to the transmitter. No mode of operation or feature may be adjusted
when Child-Lock is activated. All automatic functions (thermostat, program, etc.) will continue normally.
• To activate or deactivate the Child-Lock feature, press and hold the MODE/SET and DOWN Buttons
simultaneously for 5 seconds. The system is now locked.
• LCD Display:
When activated, the LOCK icon will appear in the MODE Zone. If any touch-zone or button is pressed when
activated, the LCD backlight will illuminate and the LOCK icon will flash for 5 seconds in the MODE Zone.
COMMUNICATION SAFETY FEATURE:
• In manual ON, THERMOSTAT ON, AND PROGRAM modes of operation, the transmitter will automatically send
a communication safety transmission every 15 minutes. This signal is further processed by the ignition control
module to verify the transmitter is communicating properly.
LOW BATTERY INDICATOR:
•
The remote control transmitter has a built-in ‘low-battery’ detection mode to signal you when the transmitter
becomes low on battery power. When the batteries become low, a battery icon will appear in the touch screen
window immediately to the right of the word ‘ROOM’ on the air temperature window.
The life span of the transmitter batteries will vary depending of the quality of the batteries, the number of ON/OFF
ignitions of the heater, and the number of changes in air temperature vs. set point temperature.