Lynx Adventure 800 Скачать руководство пользователя | Manualshive

Страница: 8 / 75

background image

7

ENGLISH

4. WHAT TO DO TO OBTAIN WARRANTY COVERAGE

The customer must notify a servicing BRP distributor/dealer within two (2) months of the
appearance of a defect, and provide it with reasonable access to the product and reasonable
opportunity to repair it. The customer must also present to the authorized BRP distributor/
dealer, proof of purchase of the product and must sign the repair/work order prior to starting
the repair in order to validate the warranty repair. All parts replaced under this limited war-
ranty become the property of BRP.

5. WHAT BRP WILL DO

BRP’s obligations under this warranty are limited to, at its sole discretion, repairing parts
found defective under normal use, maintenance and service, or replacing such parts with
new genuine LYNX parts without charge for parts and labor, at any authorized BRP distri-
butor/dealer during the warranty coverage period.

BRP reserves the right to improve or modify products from time to time without assuming
any obligation to modify products previously manufactured.

6. EXCLUSIONS

The following are not warranted under any circumstances:

• Normal wear and tear;

• Routine maintenance items, tune ups, adjustments;

• Damage caused by failure to provide proper maintenance and/or storage, as described in

the Operator’s Guide;

• Damage resulting from removal of parts, improper repairs, service, maintenance, modifi-

cations or use of parts not manufactured or approved by BRP or resulting from repairs
done by a person that is not an authorized servicing BRP distributor/dealer;

• Damage caused by abuse, abnormal use, neglect, use of the product on surfaces other

than snow, or operation of the product in a manner inconsistent with the recommended
operation described in the Operator’s Guide;

• Damage resulting from accident, submersion, fire, theft, vandalism or any act of God;

• Operation with fuels, oils or lubricants which are not suitable for use with the product (see

the Operator’s Guide);

• Snow or water ingestion;

• Incidental or consequential damages, or damages of any kind including without limitation

towing, storage, telephone, rental, taxi, inconvenience, insurance coverage, loan payments,
loss of time, loss of income; and

• Damage resulting from studs installed on tracks if the installation does not conform to

BRP’s instructions.

«
...
6
7
8
9
10
...
»

Содержание Adventure 800












































































Отзывы:

Нет отзывов

Похожие инструкции для Adventure 800

Бренд: TrailMaster Страницы: 13

Бренд: DETAIL K2 Страницы: 38

OUTLANDER 6x6 2021 Series

Бренд: Can-Am Страницы: 204

Бренд: Erde Страницы: 4

Бренд: cectek Страницы: 125

Бренд: Toyhouse Страницы: 6

Sportsman 700 HO 2004

Бренд: Polaris Страницы: 139

Бренд: Kellfri Страницы: 32

Бренд: SAFARI Страницы: 50

Бренд: Toro Страницы: 12

Бренд: Yerf-Dog Страницы: 80

BANSHEE YFZ350S

Бренд: Yamaha Страницы: 172

1998 Grizzly YFM600FWAK(C)

Бренд: Yamaha Страницы: 159

2012 Grizzly 300

Бренд: Yamaha Страницы: 306

Бренд: UTIFORM Страницы: 85

Бренд: Toro Страницы: 52

Бренд: Toro Страницы: 55

COMMERCIAL PRO RC14544CPKA

Бренд: Swisher Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды